136 Hindustan-Kohinoor Complex, LBS Marg, Vikhroli-West, Mumbai 400083, India.
   
Tel: +91(22) 6128 6000
Mob: +91 92235 98042
Email: scrimproducts@gmail.com
 

Recess or Inside mounted blinds are installed within the window jamb and provide a clean, custom look. This is a good option if you do not wish to cover the window frame.

Overlap or Outside mounted blinds are installed on your all or moulding surrounding the window and can make a window appear larger. It is also a solution when the window is not deep enough for an inside mount.

 

INSTALLATION CONSIDERATIONS

FRAME DEPTH
Recess mount requires a minimum mounting depth within your frame. If your frame isn’t deep enough for the style you’ve chosen, use Outside Mount.s
 
OBSTACLES
Obstacles such as window handles, grills or railings can interfere with the operation of your inside mount. Therefore, consider Overlap Mount.
 
SQUARENESS
For Recess Mount your window should be square, if not, your treatment will not hang or operate properly. Check for squareness by measuring diagonally in both directions. If measurements differ by more than ½”, consider Overlap Mount.
 
SURFACE AREA ABOVE WINDOW
Overlap Mount requires a minimum mounting surface above your window or on the window frame for installation brackets. Each product type has a recommended amount of overlap on each side of the window to allow for best coverage and privacy. See individual measure instructions for recommended overlap.
 
STACK SPACE
See individual measure instructions for Product Stacking Height or Width to determine the area your window treatment will cover when fully open.
 
LIGHT GAP
A small deduction in width and/or length is taken by the factory to allow for proper operating clearance when mounting recess. This causes a small gap on each side of the window covering affecting the blind or shade's ability to darken a room. Shades with a continuous loop control will have a larger gap on the control side. For optimal light control, Overlap mount is recommended or you may add a secondary window treatment such as draperies to hide the light gap.
 
 
 
is a Registered Trade Mark and Brand of Scrim Products Pvt. Ltd.
FOLLOW US
Website Designing by
     
 NAVIGATION  CONTACT US  LOCATION
   
Home Maintenance
About Us Ordering
Products Installations
Our Projects Contact us
Motorisation  
 
Tel:    +91(22) 6128 6000 / 6797 4647
Mob:  +91 92235 98042
Fax:   +91(22) 2577 7420 / 6128 6112
Email: scrim@vsnl.com
            info@screenall.net
            scrimproducts@gmail.com
 
136 Hindustan-Kohinoor
Complex, LBS Marg, Vikhroli-West,
Mumbai 400083, India.